Lorric EchoSense Ultrasonic Clamp-on Flow Meter for 1/2" - 2" Pipe
Very Inexpensive for Very Small Pipes
The EchoSense Ultrasonic flowmeter measures fluid flow by detecting the time difference between signals transmitted from two probes, A and B. This time difference is used to determine the velocity of the fluid, which is combined with the known dimensions of the pipe to calculate the flow rate using the formula Flow rate = cross-sectional area x flow velocity.
Automatic Pipe Detection
Unlike traditional ultrasonic flowmeters that demand manual input of pipe diameter and wall thickness, LORRIC’s new EchoSense technology automatically detects and configures these settings for you. Enjoy improved efficiency with effortless setup.
Size Specific Sizes:
- 1/2" (0.83-0.87" OD)
- 3/4" (0.98"-1.07" OD),
- 1" (1.26"-1.34" OD),
- 1-1/4" (1.5"-1.66" OD),
- 1-1/2" (1.89"-1.97" OD),
- 2" (2.36"-2.48" OD)
Specs
| FU-ES015 | FU-ES020 | FU-ES025 | FU-ES032 | FU-ES040 | FU-ES050 | FU-ES065 | FU-ES075 | |
| Installation method | Outside the pipe (clamp-on type) | |||||||
| Applicable diameter |
21-22 mm |
25-27.2 mm |
32-34 mm |
38-42.16 mm |
48-50 mm |
60-63 mm |
73-76.3 mm |
88.9-90 mm |
| 0.83-0.87 inch | 0.83-0.87 inch | 1.26-1.34 inch | 1.5-1.66 inch | 1.89-1.97 inch | 2.36-2.48 inch | 2.87-3 inch | 3.5-3.54 inch | |
| Applicable pipe material | Metal pipe, Plastic pipe (UPVC, PPH, PVDF) | |||||||
| Applicable fluid | Various liquids (no impurities or air bubbles) | |||||||
| Applicable fluid temperature | 0 ~ 85°C (no ice on the piping surface) | |||||||
| Velocity range | ±0.3 to 6.0 m/s recommended, ±0.1 to 10m/s measurable | |||||||
| Flow range |
1.5-120 LPM |
2-200 LPM |
3-300 LPM |
5-470 LPM |
8-770 LPM |
13-1320 LPM |
22-1670 LPM |
30-1870 LPM |
| 0.4-31.7 gpm | 0.53-52.83 gpm | 0.53-52.83 gpm | 1.32-124.16 gpm | 2.11-203.41 gpm | 3.43-348.71 gpm | 5.81-441.17 gpm | 7.93-494 gpm | |
| Language | English, Traditional and Simplified Chinese (others can be customized) | |||||||
| Units |
Metric - Meters, Cubic Meters, Liters Time - Seconds, Minutes, Hours, Days Imperial - Feet, Cubic Feet, UK gallon, US gallon |
|||||||
| Display mode | Dual screen display: 5-digit LED + 3-color backlight, 3-line 16-character LCD | |||||||
| Display update cycle | 0.5s、1s | |||||||
| Measurement Accuracy |
±3.0% RD at 10% to 100% of F.S. ±0.3% F.S. at 0% to 10% of F.S.* |
|||||||
| Display resolution | Maximum resolution 0.0001 (finest) | |||||||
| Power demand | DC 12V to 36V | |||||||
| Power I/O Connector | M12 8-pin connector | |||||||
| Input/Output |
Analog output with self-powered 16-bit 4-20mA Modbus RTU RS485 two-wire optocoupler switch signal (with 2 meters long signal line) |
|||||||
| Consumption current |
<200mA@12V when starting up and working stably (not included in the communication current) |
|||||||
| Protection circuit | Power reverse connection protection, Power surge protection | |||||||
| waterproof level | IP66 ** | |||||||
| Ambient temperature | -10 ~ 60°C (no freezing) | |||||||
| Relative humidity | 35~ 85%RH (non-condensing) | |||||||
| material | PPS+GF、PEEK、NBR、Silicon、PA66+GF、PC+GF、SS304、PMMA | |||||||
| weight (g) | 770 | 770 | 785 | 800 | 1390 | 1540 | 1580 | 1650 |
* The measurement accuracy is established in a controlled laboratory environment where the pipe and fluid conditions are set and the instrument is calibrated to zero before conducting tests at 25°C. Although statistical results are obtained under these conditions, there may be variances in accuracy when used in customer environments.
** Incorrect installation when rotating the screen by loosening the screws around it may affect the IP66 waterproof protection.
NON-STOCK item. Please allow 2-4 weeks delivery.
We Also Recommend
